Distributor Timken Koyo Fak Inch Size Tapered Roller Bearing Set 1 Lm11749/10 Set 2 Lm11949/10 596//493D Auto Part Wheel Hub/Clutch Rolling Bearing Auto Bearing

Product Description

Product Description

Distributor Timken Koyo Fak Inch Size Tapered Roller Bearing Set 1 Lm11749/10 Set 2 Lm11949/10 596//493D Auto Part Wheel Hub/Clutch Rolling Bearing Auto Bearing

    Tapered roller bearing is a kind of radial thrust rolling bearing whose rolling element is tapered roller. There are small cone angle and large cone angle. The small cone angle mainly bears the radial and axial combined load dominated by the radial load, which is often used in pairs and installed in reverse direction. The inner and outer seat rings can be installed separately, and the radial and axial clearance can be adjusted during the installation and use; the large cone angle mainly bears the axial and radial combined load dominated by the axial load, which is generally not used to bear the pure axial load alone, but as a pair configuration (the same name end is opposite) It can be used to bear pure radial load.

Product name	Tapered roller bearing
Material	Bearing Steel
Standard	DIN GB ISO JIS
Bearing Package	Barreled, bagged, boxed, palletized or as customers' requirement.
Service	OEM service provided
Delivery time	3-10 days depends on quantity needed

Features and Benefits:
    1: It is a separate type bearing. Both the inner and outer rings of the bearing have tapered raceways, and the rollers are cone-shaped. The roller and raceway are in linear contact, which can bear heavy radial and axial combined load and axial load. The larger the contact angle is, the higher the axial bearing capacity is; on the contrary, the smaller the contact angle is, the lower the axial bearing capacity is.
    2: The design of tapered roller should make the contact line between roller and inner and outer raceway extend and cross at the same point of bearing axis to realize rolling.
    3: Tapered roller bearings can be divided into single row, double row and four row tapered roller bearings. This kind of bearing also uses English series products.
Applications:
    Automobile
    Rolling Mill
    Mining
    Metallurgy
    Plastic Machinery

						Tangent of the contact Angle	The inner ring locates the step	Outer ring positioning step	Basic rated dynamic load	Basic static load rating	Limit speed (fat)	Limit speed (oil)	Bearing No.
d	D	T	B	C	r		da	Da	Cr	C0r	nlim	nlim
/mm	/mm	/mm	/mm	/mm	/mm		/mm	/mm	/kN	/kN	/r•min-1	/r•min-1
15	35	11.8	11	10	0.6	0.23	20	30	-	-	-	-	30203
15	42	14.3	13	11	1	0.19	21	36	22.8	21.5	9000	12000	30302
17	40	13.3	12	11	1	0.23	23	34	20.8	21.8	9000	12000	30203
17	40	17.3	16	14	1	0.21	23	34	-	-	-	-	32203
17	47	15.3	14	12	1	0.19	23	41	28.2	27.2	8500	11000	30303
17	47	20.3	19	16	1	0.19	23	41	35.2	36.2	8500	11000	32303
20	37	12	12	9	0.3	0.21	22.4	34.6	13.2	17.5	9500	13000	32904
20	42	15	15	12	0.6	0.25	25	37	25	28.2	8500	11000	32004
20	47	15.3	14	12	1	0.23	26	41	28.2	30.5	8000	10000	30204
20	47	19.3	18	15	1	0.22	26	41	-	-	-	-	32204
20	52	16.3	15	13	1.5	0.2	29	43	33	33.2	7500	9500	30304
20	52	22.3	21	18	1.5	0.2	29	43	42.8	46.2	7500	9500	32304
22	40	12	12	9	0.3	0.21	24.4	37.6	15	20	8500	11000	329/22
22	44	15	15	11.5	0.6	0.26	27	39	26	30.2	8000	10000	320/22
25	42	12	12	9	0.3	0.21	27.4	39.6	16	21	6300	10000	32905
25	47	15	15	11.5	0.6	0.29	30	42	28	34	7500	9500	32005
25	47	17	17	14	0.6	0.19	30	42	32.5	42.5	7500	9500	33005
25	52	16.3	15	13	1	0.25	31	46	32.2	37	7000	9000	30205
25	52	19.3	18	16	1	0.24	31	46	-	-	-	-	32205
25	52	22	22	18	1	0.23	31	46	47	55.8	7000	9000	33205
25	62	18.3	17	15	1.5	0.2	34	53	46.8	48	6300	8000	30305
25	62	18.3	17	13	1.5	0.55	34	53	40.5	46	6300	8000	31305
25	62	25.3	24	20	1.5	0.2	34	53	61.5	68.8	6300	8000	32305
28	45	12	12	9	0.3	0.21	30.4	42.6	16.8	22.8	7500	9500	329/28
28	52	16	16	12	1	0.29	34	46	31.5	40.5	6700	8500	320/28
28	58	24	24	19	1	0.23	34	52	58	68.2	6300	8000	332/28
30	47	12	12	9	0.3	0.21	32.4	44.6	17	23.2	7000	9000	32906
30	55	17	16	14	1	0.29	36	49	27.8	35.5	6300	8000	32006X2
30	55	17	17	13	1	0.29	36	49	35.8	46.8	6300	8000	32006
30	55	20	20	16	1	0.19	36	49	43.8	58.8	6300	8000	33006
30	62	17.3	16	14	1	0.25	36	56	43.2	50.5	6000	7500	30206
30	62	21.3	20	17	1	0.25	36	56	51.8	63.8	6000	7500	32206
30	62	25	25	19.5	1	0.23	36	56	63.8	75.5	6000	7500	33206
30	72	20.8	19	16	1.5	0.21	39	63	59	63	5600	7000	30306
30	72	20.8	19	14	1.5	0.55	39	63	52.5	60.5	5600	7000	31306
30	72	28.8	27	23	1.5	0.21	39	63	81.5	96.5	5600	7000	32306
32	52	14	14	10	0.6	0.21	37	47	23.8	32.5	6300	8000	329/32
32	58	17	17	13	1	0.3	38	52	36.5	49.2	6000	7500	320/32
32	65	18.3	17	15	1	0.25	38	59	-	-	-	-	302/32
32	65	26	26	20.5	1	0.23	38	59	68.8	82.2	5600	7000	332/32
35	55	14	14	11.5	0.6	0.19	40	50	25.8	34.8	6000	7500	32907
35	62	18	17	15	1	0.3	41	56	33.8	47.2	5600	7000	32007X2
35	62	18	18	14	1	0.3	41	56	43.2	59.2	5600	7000	32007
35	62	21	21	17	1	0.2	41	56	46.8	63.2	5600	7000	33007
35	72	24.3	23	19	1.5	0.25	44	63	70.5	89.5	5300	6700	32207
35	72	28	28	22	1.5	0.24	44	63	82.5	102	5300	6700	33207
35	72	18.3	17	15	1.5	0.25	44	63	54.2	63.5	5300	6700	30207
35	80	22.8	21	18	2	0.21	45	70	75.2	82.5	5000	6300	30307
35	80	22.8	21	15	2	0.55	45	70	65.8	76.8	5000	6300	31307
35	80	32.8	31	25	2	0.21	45	70	99	118	5000	6300	32307
40	62	15	14	12	0.6	0.19	45	57	21.2	28.2	5600	7000	32908X2
40	62	15	15	12	0.6	0.19	45	57	31.5	46	5600	7000	32908
40	68	19	18	16	1	0.26	46	62	39.8	55.2	5300	6700	32008X2
40	68	19	19	14.5	1	0.26	46	62	51.8	71	5300	6700	32008
40	68	22	22	18	1	0.19	46	62	60.2	79.5	5300	6700	33008
40	75	26	26	20.5	1.5	0.24	49	66	84.8	110	5000	6300	33108
40	80	19.8	18	16	1.5	0.25	49	71	63	74	5000	6300	30208
40	80	24.8	23	19	1.5	0.25	49	71	77.8	97.2	5000	6300	32208
40	80	32	32	25	1.5	0.24	49	71	105	135	5000	6300	33208
40	90	25.3	23	20	2	0.23	50	80	90.8	108	4500	5600	30308
40	90	25.3	23	17	2	0.55	50	80	81.5	96.5	4500	5600	31308
40	90	35.3	33	27	2	0.23	50	80	115	148	4500	5600	32308
45	68	15	14	12	0.6	0.21	50	63	22.2	32.8	5300	6700	32909X2
45	68	15	15	12	0.6	0.21	50	63	32	48.5	5300	6700	32909
45	75	20	19	16	0.6	0.26	50	70	44.5	62.5	5000	6300	32009X2
45	75	20	20	15.5	0.6	0.26	50	70	58.5	81.5	5000	6300	32009
45	75	24	24	19	1	0.2	51	69	72.5	100	5000	6300	33009
45	80	26	26	20.5	1.5	0.26	54	71	87	118	4500	5600	33109
45	85	20.8	19	16	1.5	0.27	54	76	67.8	83.5	4500	5600	30209
45	85	24.8	23	19	1.5	0.27	54	76	80.8	105	4500	5600	32209
45	85	32	32	25	1.5	0.26	54	76	110	145	4500	5600	33209
45	100	27.3	25	22	2	0.23	55	90	108	130	4000	5000	30309
45	100	27.3	25	18	2	0.55	55	90	95.5	115	4000	5000	31309
45	100	38.3	36	30	2	0.23	55	90	145	188	4000	5000	32309
						Tangent of the contact Angle	The inner ring locates the step	Outer ring positioning step	Basic rated dynamic load	Basic static load rating	Limit speed (fat)	Limit speed (oil)	Bearing No.
d	D	T	B	C	r		da	Da	Cr	C0r	nlim	nlim
/mm	/mm	/mm	/mm	/mm	/mm		/mm	/mm	/kN	/kN	/r•min-1	/r•min-1
50	72	15	14	12	0.6	0.23	55	67	22.2	32.8	5000	6300	32910X2
50	72	15	15	12	0.6	0.23	55	67	36.8	56	5000	6300	32910
50	80	20	19	16	1	0.28	56	74	45.8	66.2	4500	5600	32010X2
50	80	20	20	15.5	1	0.28	56	74	61	89	4500	5600	32010
50	80	24	24	19	1	0.21	56	74	76.8	110	4500	5600	33010
50	85	26	26	20	1.5	0.27	59	76	89.2	125	4300	5300	33110
50	90	21.8	20	17	1.5	0.28	59	81	73.2	92	4300	5300	30210
50	90	24.8	23	19	1.5	0.28	59	81	82.8	108	4300	5300	32210
50	90	32	32	24.5	1.5	0.28	59	81	112	155	4300	5300	33210
50	110	29.3	27	23	2.5	0.23	62	98	130	158	3800	4800	30310
50	110	29.3	27	19	2.5	0.55	62	98	108	128	3800	4800	31310
50	110	42.3	40	33	2.5	0.23	62	98	178	235	3800	4800	32310
55	80	17	17	14	1	0.21	61	74	41.5	66.8	4800	6000	32911
55	90	23	22	19	1.5	0.27	64	81	63.8	93.2	4000	5000	32011X2
55	90	23	23	17.5	1.5	0.27	64	81	80.2	118	4000	5000	32011
55	90	27	27	21	1.5	0.21	64	81	94.8	145	4000	5000	33011
55	95	30	30	23	1.5	0.25	64	86	115	165	3800	4800	33111
55	100	22.8	21	18	2	0.27	65	90	90.8	115	3800	4800	30211
55	100	26.8	25	21	2	0.27	65	90	108	142	3800	4800	32211
55	100	35	35	27	2	0.27	65	90	142	198	3800	4800	33211
55	120	31.5	29	25	2.5	0.23	67	108	152	188	3400	4300	30311
55	120	31.5	29	21	2.5	0.55	67	108	130	158	3400	4300	31311
55	120	45.5	43	35	2.5	0.23	67	108	202	270	3400	4300	32311
60	85	17	16	14	1	0.22	66	79	34.5	56.5	4000	5000	32912X2
60	85	17	17	14	1	0.22	66	79	46	73	4000	5000	32912
60	95	23	22	19	1.5	0.29	69	86	64.8	98	3800	4800	32012X2
60	95	23	23	17.5	1.5	0.29	69	86	81.8	122	3800	4800	32012
60	95	27	27	21	1.5	0.22	69	86	96.8	150	3800	4800	33012
60	100	30	30	23	1.5	0.26	69	91	118	172	3600	4500	33112
60	110	23.8	22	19	2	0.27	70	100	102	130	3600	4500	30212
60	110	29.8	28	24	2	0.27	70	100	132	180	3600	4500	32212
60	110	38	38	29	2	0.27	70	100	165	230	3600	4500	33212
60	130	33.5	31	26	3	0.23	74	116	170	210	3200	4000	30312
60	130	33.5	31	22	3	0.55	74	116	145	178	3200	4000	31312
60	130	48.5	46	37	3	0.23	74	116	228	302	3200	4000	32312
65	90	17	17	14	1	0.24	71	84	45.5	73.2	3800	4800	32913
65	100	23	22	19	1.5	0.31	74	91	67	102	3600	4500	32013X2
65	100	23	23	17.5	1.5	0.31	74	91	82.8	128	3600	4500	32013
65	100	27	27	21	1.5	0.23	74	91	98	158	3600	4500	33013
65	110	34	34	26.5	1.5	0.27	74	101	142	220	3400	4300	33113
65	120	24.8	23	20	2	0.27	75	110	120	152	3200	4000	30213
65	120	32.8	31	27	2	0.27	75	110	160	222	3200	4000	32213
65	120	41	41	32	2	0.26	75	110	202	282	3200	4000	33213
65	140	36	33	28	3	0.23	79	126	195	242	2800	3600	30313
65	140	36	33	23	3	0.55	79	126	165	202	2800	3600	31313
65	140	51	48	39	3	0.23	79	126	260	350	2800	3600	32313
70	100	20	19	16	1	0.21	76	94	53.2	85.5	3600	4500	32914X2
70	100	20	20	16	1	0.21	76	94	70.8	115	3600	4500	32914
70	110	25	24	20	1.5	0.29	79	101	83.8	128	3400	4300	32014X2
70	110	25	25	19	1.5	0.29	79	101	105	160	3400	4300	32014
70	110	31	31	25.5	1.5	0.19	79	101	135	220	3400	4300	33014
70	120	37	37	29	2	0.25	80	110	172	268	3200	4000	33114
70	125	26.3	24	21	2	0.28	80	115	132	175	3000	3800	30214
70	125	33.3	31	27	2	0.28	80	115	168	238	3000	3800	32214
70	125	41	41	32	2	0.27	80	115	208	298	3000	3800	33214
70	150	38	35	30	3	0.23	84	136	218	272	2600	3400	30314
70	150	38	35	25	3	0.55	84	136	188	230	2600	3400	31314
70	150	54	51	42	3	0.23	84	136	298	408	2600	3400	32314
75	105	20	20	16	1	0.22	81	99	78.2	125	3400	4300	32915
75	115	25	24	20	1.5	0.31	84	106	85.2	135	3200	4000	32015X2
75	115	25	25	19	1.5	0.31	84	106	102	160	3200	4000	32015
75	115	31	31	25.5	1.5	0.2	84	106	132	220	3200	4000	33015
75	125	37	37	29	2	0.26	85	115	175	280	3000	3800	33115
75	130	27.3	25	22	2	0.29	85	120	138	185	2800	3600	30215
75	130	33.3	31	27	2	0.29	85	120	170	242	2800	3600	32215
75	130	41	41	31	2	0.29	85	120	208	300	2800	3600	33215
75	160	40	37	31	3	0.23	89	146	252	318	2400	3200	30315
75	160	40	37	26	3	0.55	89	146	208	258	2400	3200	31315
75	160	58	55	45	3	0.23	89	146	348	482	2400	3200	32315
80	110	20	20	16	1	0.23	86	104	79.2	128	3200	4000	32916
80	125	29	27	23	1.5	0.28	89	116	102	162	3000	3800	32016X2
80	125	29	29	22	1.5	0.28	89	116	140	220	3000	3800	32016
80	125	36	36	29.5	1.5	0.19	89	116	182	305	3000	3800	33016
80	130	37	37	29	2	0.28	90	120	180	292	2800	3600	33116
80	140	28.3	26	22	2.5	0.28	92	128	160	212	2600	3400	30216
80	140	35.3	33	28	2.5	0.28	92	128	198	278	2600	3400	32216
80	140	46	46	35	2.5	0.28	92	128	245	362	2600	3400	33216
80	170	42.5	39	33	3	0.23	94	156	278	352	2200	3000	30316
80	170	42.5	39	27	3	0.55	94	156	230	288	2200	3000	31316
80	170	61.5	58	48	3	0.23	94	156	388	542	2200	3000	32316
85	120	23	22	19	1.5	0.22	94	111	74.2	125	3400	3800	32917X2
85	120	23	23	18	1.5	0.22	94	111	96.8	165	3400	3800	32917
85	130	29	27	23	1.5	0.29	94	121	105	170	2800	3600	32017X2
85	130	29	29	22	1.5	0.29	94	121	140	220	2800	3600	32017
85	130	36	36	29.5	1.5	0.19	94	121	180	305	2800	3600	33017
85	140	41	41	32	2.5	0.27	97	128	215	355	2600	3400	33117
85	150	30.5	28	24	2.5	0.28	97	138	178	238	2400	3200	30217
85	150	38.5	36	30	2.5	0.28	97	138	228	325	2400	3200	32217
85	150	49	49	37	2.5	0.28	97	138	282	415	2400	3200	33217
85	180	44.5	41	34	4	0.23	103	162	305	388	2000	2800	30317
85	180	44.5	41	28	4	0.55	103	162	255	318	2000	2800	31317
85	180	63.5	60	49	4	0.23	103	162	422	592	2000	2800	32317
90	125	23	23	18	1.5	0.23	99	116	77.8	140	3200	3600	32918X2
90	125	23	23	18	1.5	0.23	99	116	95.8	165	3200	3600	32918
90	140	32	32	24	2	0.28	100	130	122	192	2600	3400	32018X2
90	140	32	32	24	2	0.28	100	130	170	270	2600	3400	32018
90	140	39	39	32.5	2	0.18	100	130	232	388	2600	3400	33018

Packaging & Shipping

 

Company Profile

 

Our Advantages

Our Advantages:
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer's requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. 
SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost. 
3. It's better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS standard bearings. 
2. MOQ: 1000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don't disclose any info.

FAQ

1.What is the minimum order quantity for this product?

    Can be negotiated, we will try our best to meet customer needs.Our company is mainly based
    on wholesale sales, most customers'orders are more than 1 ton.
2.What is your latest delivery time?
    Most orders will be shipped within 7-15 days of payment being received.
3.Does your company have quality assurance?
    Yes, for 1 years.
4.What is the competitiveness of your company's products compared to other companies?
    High precision, high speed, low noise.
5.What are the advantages of your company's services compared to other companies?
    Answer questions online 24 hours a day, reply in a timely manner, and provide various documents required by customers for customs clearance or sales. 100% after-sales service.
6.Which payment method does your company support?
    Do our best to meet customer needs, negotiable.
7.How to contact us quickly?
    Please send us an inquiry or message and leave your other contact information, such as phone number, whatsapp account or wechat account, we will contact you as soon as possible and provide the detailed information you need.

Please feel free to contact us, if you have any other question